Grouting mortar

ERGELIT grouting mortars are shrink-free and self-levelling, with excellent compression strength, adhesive strength and tensile strength. Different sizes of particles and the way they are combined based on ERGELIT’s many years of experience guarantee you an economical, powerful and permanent solution to your problems.

 

 

ERGELIT Superfix 10

Overview

All-in-one cement based mortar, with organic and inorganic additives and high early strength.

  • granular powder
  • size of particles < 1mm
  • consistency: from plastic to fluid.

Technical info

  • Hardens rapidly
  • Shrink-resistant in damp conditions
  • Expands > 0·1 vol. %
  • Frost-proof and resistant to road-salt
  • Flowability > 65 cm
  • Acid and alkali resistant between pH 3-10
  • Chloride-free
  • High resistance to dynamic forces
  • Waterproof
  • Oil resistant
  • Good adhesive properties

As concrete. Accredited for use in drinking water applications. See also the safety sheet.

Areas of Application

For bedding in or repairing:

  • machinery anchorage points
  • bridge bearings
  • machinery foundations
  • posts
  • plates
  • connections to domestic systems
  • turbines
  • prefabricated concrete sections
  • rail anchors
  • for filling-in gaps
  • manhole frames

ERGELIT Superfix 35F

Overview

All-in-one cement based mortar, with organic and inorganic additives and with fibres

  • granular powder
  • size of particles < 3.5mm
  • consistency: from plastic to fluid

Technical info

  • Rapid hardening
  • No shrinking in damp conditions
  • Waterproof
  • Chloride free
  • Resistant to acid and alkali at pH 3-10
  • High resistance to dynamic forces
  • Oil resistant
  • Resistant to frost and road-salt
  • flowability > 65cm 
  • Expansion > 0.1 vol. %

Areas of Application

For bedding in or repairing: 

  • machinery anchorage points
  • posts
  • plates
  • connections to domestic systems
  • bridge supports
  • sealing gaps > 10mm 
  • repairing kerbs
  • steps and small sections of concrete flooring
  • fixing traffic signs

ERGELIT V80

Overview

Cementitious, one-component grout, with organic and inorganic additives

  • granular powder
  • size of particles < 8 mm
  • consistency: highly fluid to plastic

Technical info

  • shrinkage free (where preparation, processing and follow-up
  • treatment are as specified)
  • expands > 0.1% volume
  • frost and road-salt resistant
  • flowability > 65 cm
  • acid and alkali resistant between pH 6 - 10
  • chloride free
  • can withstand high dynamic loads
  • impermeable to water
  • impervious to oil
  • good adhesive properties

Areas of Application

Fluid grout for bedding in machine anchors, bridge supports, machine foundations, posts, slabs, domestic service connections, turbines, prefabricated concrete sections, rail anchors, rolling mill plant, as well as grouting gaps > 25mm in all types of raised manhole covers. For repairing kerbs, steps and small areas of concrete flooring.